在 “足不出戶享美食” 的外賣時代，打包盒既是餐品的 “移動鎧甲”，也是商家品牌形象的 “行走名片”。但定制一次性外賣打包盒并非簡單的 “印個 logo”，從材質安全到設計適配，稍有疏忽就可能影響用戶體驗甚至引發食品安全問題。想要定制出實用又亮眼的打包盒，這些關鍵要點不得不看。

　　In the era of "enjoying food without leaving home" for takeout, the packaging box is not only the "mobile armor" of food, but also the "walking business card" of the merchant's brand image. However, customizing disposable takeaway packaging boxes is not simply about "printing a logo". From material safety to design compatibility, even a slight negligence can affect user experience and even lead to food safety issues. To customize a practical and eye-catching packaging box, these key points must be considered.

　　一、材質選擇：安全與性能的雙重考量

　　1、 Material selection: dual considerations of safety and performance

　　定制打包盒的首要原則是確保材質安全合規。食品接觸材料必須符合相關衛生標準，避免使用可能析出有害物質的劣質塑料。常見的安全材質中，聚丙烯（PP）材質耐高溫，可用于微波爐加熱，適合盛裝熱食；聚乙烯（PE）材質柔韌耐低溫，常用于冷飲或醬料包裝；生物降解材料如 PLA（聚乳酸）則更環保，適合注重可持續發展的商家。除了安全性，還要根據餐品特性選擇適配材質：湯汁較多的菜品需選密封性強、防滲漏的材質；油炸食品則要考慮材質的防油性能，避免油漬滲透。同時，注意材質的硬度與韌性，過軟的盒子易變形，過硬則可能在運輸中刮破餐品包裝。

　　The primary principle of customizing packaging boxes is to ensure material safety and compliance. Food contact materials must comply with relevant hygiene standards and avoid using inferior plastics that may release harmful substances. Among common safety materials, polypropylene (PP) material is heat-resistant and can be used for microwave heating, making it suitable for holding hot food; Polyethylene (PE) material is flexible and resistant to low temperatures, commonly used for packaging cold drinks or sauces; Biodegradable materials such as PLA (polylactic acid) are more environmentally friendly and suitable for businesses that prioritize sustainable development. In addition to safety, it is also necessary to choose suitable materials based on the characteristics of the dish: dishes with a lot of soup should choose materials with strong sealing and leak resistance; When frying food, the oil resistance of the material should be considered to prevent oil stains from penetrating. At the same time, pay attention to the hardness and toughness of the material. Boxes that are too soft are prone to deformation, while those that are too hard may scratch the food packaging during transportation.

　　二、尺寸規格：貼合餐品的 “量身定制”

　　2、 Size specifications: Tailored to fit the food

　　打包盒尺寸需精準匹配餐品容量與形狀。過大的盒子會導致餐品在運輸中晃動、撒漏，還增加包裝成本；過小則可能裝不下足量食物或擠壓菜品造型。定制前，需測量各類餐品的實際體積，包括主菜、配菜、主食的組合尺寸，預留 1 - 2 厘米的空間余量，確保食物既能穩固擺放，又不會因擠壓變形。此外，考慮外賣配送的堆疊需求，盒子的高度、形狀應便于多層疊加，底部設計需足夠承重，避免上層盒子壓壞下層餐品。對于套餐類訂單，可定制分格打包盒，既能分類盛裝不同菜品，又能防止串味。

　　The size of the packaging box should accurately match the capacity and shape of the food. Oversized boxes can cause food items to shake and leak during transportation, and also increase packaging costs; If it is too small, it may not fit enough food or squeeze the shape of the dish. Before customization, it is necessary to measure the actual volume of various types of dishes, including the combination size of main dishes, side dishes, and main dishes, and reserve 1-2 centimeters of space allowance to ensure that the food can be placed stably without deformation due to compression. In addition, considering the stacking requirements of food delivery, the height and shape of the boxes should be easy to stack in multiple layers, and the bottom design should be sufficiently load-bearing to avoid the upper boxes crushing the lower food. For set meal orders, customized compartment packaging boxes can be used to classify and store different dishes while preventing cross flavors.

　　三、功能設計：細節之處見 “貼心”

　　3、 Functional design: see "thoughtful" for details

　　實用的功能設計能大幅提升用戶體驗。防漏設計是關鍵，帶扣合鎖邊、密封圈的盒子可有效防止湯汁溢出；部分餐盒還可增加折疊扣或卡扣結構，增強密封性。對于需要保溫的餐品，可選擇加厚型或帶隔熱層的材質，或在外包裝添加保溫層；針對沙拉、涼拌菜等冷食，透氣孔設計能防止水汽凝結，保持食材干爽。此外，人性化細節不容忽視：盒蓋開啟處的易撕口、把手設計方便用戶取用；可降解材質的標注能傳遞環保理念，提升品牌好感度。

　　Practical functional design can significantly enhance user experience. Leak proof design is key, and boxes with buckle locking edges and sealing rings can effectively prevent soup from overflowing; Some meal boxes can also be equipped with folding or snap fastener structures to enhance sealing. For meals that require insulation, thicker or insulated materials can be chosen, or insulation layers can be added to the outer packaging; For cold dishes such as salads and cold dishes, the breathable hole design can prevent moisture condensation and keep the ingredients dry. In addition, humanized details cannot be ignored: the easy to tear opening of the box cover and the handle design are convenient for users to access; The labeling of biodegradable materials can convey environmental protection concepts and enhance brand favorability.

　　四、印刷與外觀：顏值與品牌的 “雙重表達”

　　4、 Printing and Appearance: Dual Expression of Appearance and Brand

　　包裝外觀是商家傳遞品牌形象的重要窗口。定制印刷需選擇安全無毒的油墨，避免油墨與食物直接接觸。設計上，色彩搭配要簡潔醒目，既能體現品牌調性，又不會因過于花哨影響食欲。將品牌 logo、slogan 與特色元素融入包裝，如地方美食商家可添加地域文化圖案，能強化品牌記憶點。同時，注意印刷工藝的選擇：絲網印刷適合大面積色塊，成本較低；數碼印刷則能呈現更精細的圖案，但價格相對較高。若預算充足，可嘗試燙金、凹凸壓印等工藝，提升包裝質感。

　　The appearance of packaging is an important window for businesses to convey their brand image. Customized printing requires the selection of safe and non-toxic ink to avoid direct contact between ink and food. In terms of design, color matching should be simple and eye-catching, which can reflect the brand tone and not affect appetite due to being too flashy. Integrating brand logos, slogans, and distinctive elements into packaging, such as adding regional cultural patterns to local food vendors, can enhance brand memory points. At the same time, pay attention to the selection of printing technology: screen printing is suitable for large-area color blocks and has a lower cost; Digital printing can present finer patterns, but at a relatively higher price. If the budget is sufficient, you can try techniques such as hot stamping and embossing to enhance the packaging quality.

　　五、供應商選擇：靠譜伙伴的 “篩選法則”

　　5、 Supplier selection: the "screening rule" for reliable partners

　　選對供應商是定制成功的關鍵。優先考察供應商的資質與生產能力，查看其是否具備相關行業認證，如食品接觸材料安全認證、環保認證等。要求供應商提供樣品，實際測試材質手感、密封性、印刷效果等細節，避免 “貨不對板”。了解供應商的起訂量與交貨周期，確保滿足自身訂單需求；同時，關注售后服務，如出現印刷錯誤、質量問題能否及時退換貨。此外，可通過行業口碑、客戶評價等渠道，側面了解供應商的信譽度與合作穩定性。

　　Choosing the right supplier is the key to successful customization. Prioritize examining the qualifications and production capabilities of suppliers to see if they have relevant industry certifications, such as food contact material safety certification, environmental certification, etc. Request the supplier to provide samples for actual testing of material feel, sealing, printing effect, and other details to avoid "goods not matching the board". Understand the minimum order quantity and delivery cycle of suppliers to ensure compliance with their own order requirements; At the same time, pay attention to after-sales service to ensure timely returns and exchanges in case of printing errors or quality issues. In addition, the credibility and cooperation stability of suppliers can be indirectly understood through industry reputation, customer evaluations, and other channels.

　　本文由一次性外賣打包盒友情奉獻.更多有關的知識請點擊:http://sushuiheng.cn我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

　　This article is a friendly contribution from food packaging boxes For more information, please click: http://sushuiheng.cn We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message